film capacitors ? power factor correction deltacap capacitors series/type: mkdxxx-i-xx ordering code: b32300a*/ b 32301a****a***/ b32301a****b*** date: may 2016 version: 6 ? epcos ag 2016. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company. content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! please fill in the table and then change the color to "white". this ensures that the table disappears (invisible) for the customer pdf. don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! identification/classification 1 (header 1 + top left bar): film capacitors ? power factor correction identification/classification 2 (header 2 + bottom left header bar): deltacap capacitors ordering code: (top right header bar) b32300a*/ b32301a****a***/ b32301a****b*** series/type: (bottom right header bar) mkdxxx-i-xx preliminary data (optional): (if necessary) department: cap film p pm pfc date: may 2016 version: 6
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 2 of 9 important notes at the end of this document . construction and general data ? dielectric: polypropylene film ? non-pcb, semi-dry biodegradable resin ? extruded round aluminum can with stud ? degree of protection: ip00 (optionally ip54 with terminal cover; additional cable gland at cable entry required) features ? single-phase, provided with discharge resistors ? double safety system: overpressure disconnector, self-healing technology ? naturally air cooled (or forced air cooling) ? indoor mounting typical applications ? for power factor correction terminals ? fast-on terminals b32300a* series ? screw terminals b32301a* series mounting ? threaded stud at bottom of can (max. torque for m12 = 10 nm) technical data and specifications characteristics rated capacitance c r according to specification table tolerance ?5 / +10% rated voltage v r according to specification table rated frequency f r 50 and 60 hz output according to specification table rated current i r according to specification table
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 3 of 9 important notes at the end of this document . maximum ratings v max v r + 10 % (up to 8 h daily) / v r + 15 % (up to 30 min daily) / v r + 20 % (up to 5 min daily) / v r + 30 % (up to 1 min daily) i max up to 1.3 ? i r (up to 1.5? i r including combined effects of harmonics, overvoltages and capacitance tolerance) i s up to 200 ? i r (a) *power dissipation 0.2 w/kvar (dielectric) and 0.45 w / kvar (total) * without discharge resistor test data v tt 2.15 ? v r during 2 s v tc 3000 v ac / 50 hz during 10 s *tan (50 hz) 1.0 ? 10 -3 * without discharge resistor climatic category ?40/d t min -40 oc t max +55 oc storage temperature -40 c ? +85 c t max hotspot +85 oc humidity av. rel. < 95% degree of protection ip00 (optionally ip54 with terminal cover; additional cable gland at cable entry required) maximum altitude 4000 m mean life expectancy t ld up to 135000 hours at temperature class -40/c up to 100000 hours at temperature class -40/d max. 5000 switchings per year acc. to iec 60831 design data dimensions (d h) according to specification table weight approx according to specification table impregnation non pcb, resin filling: soft polyurethane resin fixing threaded bolt m12 max. torque (al can stud) 10 nm mounting position only in the vertical position. see ?maintenance and installation manual? for further details.
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 4 of 9 important notes at the end of this document . safety mechanical safety overpressure disconnector max. short circuit current (afc: 10 ka according ul 810 standard) discharge resistor time 60 s to 75 v or less reference standards iec 60831?1/2, ul 810-5th edition label design terminals protection degree ip00 for b32300 (optional ip54 with plastic terminal cap, additional cable gland at cable entry required); ip20 for b32301 maximum terminal current 15 a (fast-on terminals) / 50 a (screw terminals) creepage distance (min) 12.7 mm clearance (min) 9.6 mm
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 5 of 9 important notes at the end of this document . ordering codes type 50 hz 60 hz c r d h weight ordering code packing unit pcs output kvar i r a output kvar i r a f mm kg rated voltage 230 v ac, 50/60 hz, single phase mkd230-i-0.8 0.8 3.5 1.0 4.2 48 63.5 x 64.5 0.3 b32300a2002a830 12 mkd230-i-1.7 1.7 7.4 2.0 8.9 102 63.5 x 102 0.4 b32300a2012a730 12 mkd230-i-2.5 2.5 10.9 3.0 13.1 151 63.5 x 127 0.5 b32300a2022a530 12 rated voltage 250 v ac, 50/60 hz, single phase mkd250-i-0.8 0.8 3.2 1.0 3.8 41 50 x 77 0.2 b32300a2002a850 50 mkd250-i-1.7 1.7 6.8 2.0 8.2 87 63.5 x 92 0.4 b32300a2012a750 12 mkd250-i-2.0 2.0 7.8 2.4 9.4 100 63.5 x 92 0.4 b32300a2022a050 12 mkd250-i-2.5 2.5 10.0 3.0 12.0 127 63.5 x 102 0.5 b32300a2022a550 12 mkd250-i-5.0 5.0 20.0 6.0 24.0 255 75 x 166 0.7 b32301a2052#050* 6 mkd250-i-7.5 7.5 30.0 9.0 36.0 382 85 x 196 1.1 b32301a2072#550* 4 mkd250-i-10 10.0 40.0 12.0 48.0 510 85 x 216 1.2 b32301a2102#050* 4 rated voltage 400 v ac, 50/60 hz, single phase mkd400-i-0.8 0.8 2.0 1.0 2.4 16 50 x 64.5 0.2 b32300a4002a800 50 mkd400-i-1.7 1.7 4.3 2.0 5.2 34 63.5 x 62.5 0.3 b32300a4012a700 12 mkd400-i-2.5 2.5 6.3 3.0 7.6 50 63.5 x 77 0.3 b32300a4022a500 12 mkd400-i-3.3 3.3 8.3 4.0 10.0 66 63.5 x 102 0.4 b32300a4032a300 12 mkd400-i-4.2 4.2 10.5 5.0 12.6 84 63.5 x 102 0.4 b32300a4051a000 12 mkd400-i-5.0 5.0 12.5 6.0 15.0 100 63.5 x 127 0.5 b32300a4052a000 12 rated voltage 415 v ac, 50/60 hz, single phase mkd415-i-0.8 0.8 1.9 1.0 2.3 15 50 x 64.5 0.2 b32300a4082a810 50 mkd415-i-1.7 1.7 4.0 2.0 4.8 31 63.5 x 64.5 0.3 b32300a4012a710 12 mkd415-i-2.5 2.5 6.0 3.0 7.2 46 63.5 x 102 0.4 b32300a4022a510 12 mkd415-i-3.3 3.3 8.0 4.0 9.6 61 63.5 x 102 0.4 b32300a4032a310 12 mkd415-i-5.0 5.0 12.0 6.0 14.4 92 63.5 x 127 0.6 b32300a4052a010 12 rated voltage 440 v ac, 50/60 hz, single phase mkd440-i-0.7 0.7 1.6 0.8 1.9 12 50 x 64.5 0.2 B32300A4001A840 50 mkd440-i-1.4 1.4 3.2 1.7 3.8 23 63.5 x 64.5 0.3 b32300a4011a740 12 mkd440-i-2.1 2.1 4.8 2.5 5.8 35 63.5 x 77 0.3 b32300a4021a540 12 mkd440-i-2.8 2.8 6.4 3.4 7.7 46 63.5 x 102 0.4 b32300a4031a340 12 mkd440-i-3.3 3.3 7.5 4.0 9.0 54 63.5 x 102 0.4 b32300a4032a340 12 mkd440-i-4.2 4.2 9.5 5.0 11.4 69 63.5 x 127 0.5 b32300a4051a040 12 mkd440-i-5.0 5.0 11.4 6.0 13.7 82 63.5 x 127 0.5 b32300a4052a040 12 * available either as b32301a****a*** series (2-terminal design, integrated resist or) or b32301a****b*** series (4-terminal des ign, pluggable ceramic resistor). please replace # with the right character before ordering.
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 6 of 9 important notes at the end of this document . type 50 hz 60 hz c r d h weight ordering code packing unit pcs output kvar i r a output kvar i r a f mm kg rated volta g e 480 v ac , 50/60 hz , sin g le- p hase mkd480-i-0.7 0.7 1.5 0.8 1.8 10 50 x 64.5 0.2 b32300a4001a880 50 mkd480-i-1.4 1.4 2.9 1.7 3.5 19 63.5 x 64.5 0.3 b32300a4011a780 12 mkd480-i-2.1 2.1 4.4 2.5 5.3 29 63.5 x 77 0.3 b32300a4021a580 12 mkd480-i-2.8 2.8 5.8 3.4 7.0 39 63.5 x 102 0.4 b32300a4031a380 12 rated voltage 525 v ac, 50/60 hz, single-phase mkd525-i-1.4 1.4 2.7 1.7 3.2 16 63.5 x 64.5 0.3 b32300a5011a720 12 mkd525-i-2.8 2.8 5.3 3.4 6.4 32 63.5 x 102 0.4 b32300a5031a320 12 mkd525-i-3.3 3.3 6.3 4.0 7.6 38 63.5 x 102 0.4 b32300a5032a320 12 mkd525-i-4.2 4.2 8.0 5.0 9.6 49 63.5 x 127 0.5 b32300a5051a020 12 mkd525-i-25.0 25.0 46.7 30.0 57.1 289 116 x 200 1.9 b32301a5252#025* 4 * available either as b32301a****a*** series (2-terminal design, integrated resisto r) or b32301a****b*** series (4-terminal des ign, pluggable ceramic resistor). please replace # with the right character before ordering. display of ordering codes for epcos products the ordering code for one and the same epcos product can be represented differently in data sheets, data books, other publications, on the epcos website, or in or der-related documents such as shipping notes, order confirmations and product labels. the varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products . detailed information can be found on the internet under www.epcos.com/orderingcodes important remark hereafter mentioned capacitors with the wildcard character ?# ? are available either with integrated resistors with 2 terminals (b32301***** a *** series) or with pluggable ceramic base discharge resistor with 4 terminals (b32301***** b *** series). the main difference between b32301a****a*** series and b32301a****b*** series is the way of assembling the discharge resistor. the resistor of b32301a**** a *** series is assembled inside of capacitor terminal cover, the ceramic resistor of b32301a**** b *** is plugged into the terminal pin.
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 7 of 9 important notes at the end of this document . dimensional drawings b32300a* b32301a****a*** b32301a****b***
film capacitors ? power factor correction b32300a*/ b32301a****a***/ b32301a****b*** deltacap capacitors mkdxxx-i-xx cap film p pm pfc may 2016 please read cautions and warnings and page 8 of 9 important notes at the end of this document . cautions and warnings these figures apply to the capacitor alone. because the fixing and the terminals may influence the vibration properties, it is necessary to check stability when a capacitor is built in and exposed to vibration. irrespective of this, you are advised not to locate capacitors where vibration amplitude reaches the maximum in strongly vibrating equipment. mechanical protection the capacitor has to be installed in a way that mechanical damages and dents in the aluminum can are avoided. grounding the threaded bottom stud of the capacitor has to be used for grounding. in case grounding is done via metal chassis that the capacitor is mounted to, the layer of varnish beneath the washer and nut should be removed. the maximum tightening torque is 10 nm. maintenance ? check tightness of the connections/terminals periodically. ? take current reading twice a year and compare with nominal current. use a harmonic analyser or true effective rms-meter. ? in case of current above the nominal current check your application for modifications. ? if a significant increase in the amount of non-linear loads has been detected, then a consultant has to be called in for a harmonic study. ? in case of the presence of harmonics installation of a de-tuned capacitor bank (reactors) must be considered. ? check the discharge resistors/reactors and in case of doubt, check their function: (1) power the capacitor up and down. (2) after 60 seconds the voltage between the terminals must decline to less than 75 v. ? check the temperature of capacitors directly after operation for a longer period, but make sure that the capacitors have been switched off. in case of excessive temperature of individual capacitors, it is recommended to replace these capacitors, as this should be an indication for loss factor increase, which is a sign for reaching end of life. storage and operating conditions do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. in dusty environments regular maintenance and cleaning especially of the terminals is required to avoid conductive path between phases and/or phases and ground. note for detailed information about pfc capacitors and cautions, refer to the latest version of epcos pfc product profile.
important notes page 9 of 9 the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons , it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specification is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must theref ore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-specific notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales offices. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specifications. please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . consequently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?general terms of delivery for products and services in the electrical industry? published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, alu-x, ceradiode, ceralink, cerapad, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, exocore, f iltercap, formfit, leaxield, miniblue, minicell, mkd, mkk, motorcap, pcc, phasecap, phasecube, phasemod, phicap, pqsine, siferrit, sifi, sikorel, silvercap, simdad, simic, si mid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
